Starting Remote Programming Via The Cellular Data Network - Satel INTEGRA 24 Manual

42
If the INT-GSM / INT-GSM LTE module is connected to the ETHM-1 Plus module and
connection over Ethernet cannot be established, an attempt will be made to establish
connection via the cellular data network.
Required settings of the ETHM-1 Plus module:
• C
ONNECTION VIA
Required settings of the DLOAX program for communication via the SATEL server:
• programmed: identification number assigned to the ETHM-1 Plus module by the SATEL
server (ETHM-1 ID), MAC address of the ETHM-1 Plus module (ETHM-1 MAC) and data
encryption key (DLOADX
(settings of the ETHM-1 Plus module with address "n" will be used).
1. Click on the
2. A drop-down menu will be displayed. Select "TCP/IP: Satel server".
3. A window will open. Click on the "Connection" button in the window.
4. The DLOADX program will inform you about establishing connection by means of
a suitable message.

3.4.3 Starting remote programming via the cellular data network

Programming via the cellular data network is possible in the case of INTEGRA 128-WRL or
any other control panel, if the INT-GSM / INT-GSM LTE module is installed in the alarm
system or the SATEL GSM module is connected to the control panel.
Programming the INTEGRA 128-WRL control panel
GPRS connection to the INTEGRA 128-WRL control panel can be established in one of the
following methods:
1. Initiating connection from the keypad (by the control panel). The control panel can be
programmed only from specified location. This method is recommended when the alarm
system owner does not want the remote programming to be carried out without its
knowledge. The computer with DLOADX program must have a public IP address.
2. Initiating connection by SMS message. The computer with DLOADX program must have
a public IP address.
Required settings of the control panel for all methods of establishing connection:
• programmed number of TCP port used for communication,
• configured Internet connection settings.
Initiating connection from the keypad
Required settings of the control panel:
• programmed address of computer with DLOAX program.
1. Click on the
2. A drop-down menu will be displayed. Select "TCP/IP: DLOADX <- GSM/GPRS" in it.
3. A window will open. Enter the number of the TCP port which is to be used for
communication (identical to that programmed in the GSM module, unless communication
takes place via a network device redirecting to another port).
4. Having entered the number of TCP port, click the "Start" button. Activation of the server
for cellular data network connection will follow.
5. In the LCD keypad connected to the control panel, start the S
D
([code]
OWNLOADING
installer, administrator and the user having the D
S option enabled.
ATEL SERVER
) or selected set of parameters "Module: ETHM-1, Address n"
KEY
button in the DLOADX program.
button in the DLOADX program.
S
TART
Programming
DWNL-GPRS). The function is available to the
OWNLOADING STARTING
DWNL-GPRS function
TART
right.
SATEL