Table of Contents
Advertisement
Available languages
Available languages
CHARGING/RECHARGING USING THE 12V DC/USB
CHARGING ADAPTER
IMPORTANT: Always connect the 12V DC/USB Charging Adapter
to the 12 volt DC power source (using the USB Charging Cable)
BEFORE connecting it to the unit.
1.
Make sure the Power Button is turned off (the Battery Status
LED Indicators are not lit).
2.
Insert one end of the USB Charging Cable into the 12V DC/
USB Charging Adapter.
3.
Insert the 12V DC/USB Charging Adapter into a vehicle's 12
volt DC accessory outlet or other functioning 12V DC power
source. The LED indicator on the 12V DC/USB Charging
Adapter will light green when it is properly plugged into the 12
volt DC power source.
Note: Some vehicles require that the ignition be switched to
the accessory outlet position in order to power the accessory
outlet.
4.
Lift up the protective cover of the USB ports. Insert the other
end of the USB Charging Cable into the unit's Type A USB
port.
5.
The blue Battery Status LED Indicators will gradually light up
(left to right) to indicate the unit is charging.
6.
Charge until the unit automatically shuts down. Unplug the 12V
DC/USB Charging Adapter from the 12 volt DC power source,
then disconnect the USB Charging Cable from the 12V DC/
USB Charging Adapter, and then from the unit's Type A USB
port.
7.
Press the Power Button to turn the unit on. When all three
blue Battery Status LED Indicators light, the unit battery is fully
charged.
8.
Store the 12V DC/USB Charging Adapter and USB Charging
Cable in a safe place.
CHARGING/RECHARGING USING THE USB CHARGING
CABLE AND A DEVICE WITH A USB POWER PORT (NOT
SUPPLIED)
IMPORTANT: Always connect the USB Charging Cable to the
external device's USB power port BEFORE connecting it to the unit.
A 2A USB power source is required in order to recharge the unit.
1.
Make sure the Power Button is turned off (the Battery Status
LED Indicators are not lit).
2.
Insert one end of the USB Charging Cable into an external
device's functional USB power port.
3.
Lift up the protective cover of the USB ports. Insert the other
end of the USB Charging Cable into the unit's Type A USB
port.
4.
When the unit is properly connected, the blue Battery Status
LED Indicators will gradually light up (left to right) to indicate
the unit is charging.
5.
Charge until the unit automatically shuts down.
6.
Disconnect the USB charging cable from the device's USB
power port and the unit.
7.
Press the Power Button to turn the unit on. When all three
blue Battery Status LED Indicators light, the unit battery is fully
charged.
8.
When charging is complete, store the USB Charging Cable in
safe place.
11
Advertisement
Table of Contents
