Toro 140-1559 Installation Instructions Manual

Power Harness Kit
Groundsmaster
Model No. 140-1559
Installation
1
Preparing the Machine
No Parts Required
Procedure
1. Park the machine on a level surface.
2. Engage the parking brake.
3. Lower the attachments.
4. Shut off the engine and remove the key.
2
Disconnecting the Battery
No Parts Required
Removing the Battery Cables
WARNING
Battery terminals or metal tools could short
against metal components, causing sparks.
• When removing or installing the battery,
do not allow the battery terminals to touch
any metal parts of the machine.
• Do not allow metal tools to short between
the battery terminals and metal parts of the
machine.
© 2022—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® 3200 or 3300 Series Traction Unit
Electrical sparks can cause the battery gasses
to explode, resulting in personal injury.
Incorrect battery cable routing could damage
the machine and cables, causing sparks.
• Always disconnect the negative (black)
• Always connect the positive (red) battery
Register at www.Toro.com.
WARNING
battery cable before disconnecting the
positive (red) cable.
cable before connecting the negative
(black) cable.
1. Remove the negative battery cable from the
battery post (Figure
Figure 1
1. Negative battery cable
2. Lift the insulator and remove the positive battery
cable from the battery post
Original Instructions (EN)
Printed in the USA
All Rights Reserved
Form No. 3454-889 Rev A
Installation Instructions
1).
2. Positive battery cable
(Figure 1).
*3454-889*
g252591