1. DISASSEMBLE PROCEDURES
1-1. Removal of Top Panel
1. Loosen s screws (A) and remove the Top Panel.
1-2. Removal of Bottom Panel
1. Unscrew the 6 screws (A) and remove the Bottom
Panel.
Screws (A)
Screws (A)
DIS-1
1-3. Removal of Front Panel
1. Unscrew the 6 screws (A) and remove the Front
Panel.
Screw (A)
P1
(a)
Screws (A)
Notes: 1. When removing the Front Panel, slightly
pull the Front panel for direction in arrow
(a) (disconnect a connector P1).
2. After installation of Front Panel, confirm
that the Blinder Panel is moved up and
down smoothly by hand.
3. Check the connector has been connected
securely.
1-4. Removal of Front Loading
Unit
1. Loosen 2 screws (A) and remove the Carriage
support angle.
Screws (A)
Screw (A)
Carriage support angle