Panasonic DVCPRO50 Service Manual page 38

D. Boot up the Ver. Up Software and Ver. up Procedure
1. Insert floppy disk (which is included all files of the VVVSI***) to floppy drive.
2. Install the WebPACK ISE program. "Xilinx Webpack" folder is created on windows.
3. Click the start button of windows and select "Program" and "Xilinx Webpack".
4. Select the "Device Programer" and then following screen appears.
5. Check the "Load Configuration Files", and click "Finish" button.
1.Check
2.Click
6. Select the floppy drive and then select the " *.cdf " file.
(CDF is Chain Description File, This file can write several CPLDs on the same board like a chain.)
7. Click the "Open" button.
1. Select Floppy drive
2. Select CDF file
INF-29