Inserting And Specifying Motors That Are Missing From The Motor List - Siemens SINAMICS S120 Commissioning Manual

Commissioning
5.3 Creating a project offline
6. In the inspector window, select entry "Motor- Selection - xxx".
7. Select your motor with the corresponding motor encoder in the drop-down list based on the
article number.
Motor data
– The data of the selected motor are assigned to the unspecified motor. The white area turns
Encoder
– If you have selected a motor with encoder, the encoder and the encoder evaluation are
Result
The motor is inserted and specified. If you have selected a motor without encoder, add an
encoder and an encoder evaluation in the next step.
5.3.7.2

Inserting and specifying motors that are missing from the motor list

Overview
If you want to insert, specify and manage motors in your device configuration, which are not
contained in the motor list, you can enter the most important motor data, such as the rating
plate values of the motor, manually in the inspector window.
Procedure
To insert and specify motors that are not listed in the motor list into your device configuration,
proceed as follows:
1. Open the "Motors" entry in the hardware catalog and then the "Motor data input" subentry.
The motors are presorted according to motor type. A range of induction motors, synchronous
motors and reluctance motors are available for a general selection.
2. Select the desired, unspecified motor in the device overview.
3. Drag the desired, unspecified motor to the lower area of the Motor Module.
4. Click the unspecified motor in the device view.
5. Open the inspector window if it has not been opened yet.
6. In the inspector window, select the "Motor details" menu.
The expandable menu item "Motor details"
– Rating plate values
– Optional motor data (can also be activated)
– Equivalent circuit diagram data (can also be activated)
– Motor brake
136
dark gray.
also added automatically.
①
consists of the following subsections:
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2