Advertisement
Route an Ethemet cable through the mounting kit and
connect the cab&e to the ODJ.
Align mounting kits and rotate the device dockwjse in the arrow direction
unu it fully stops and you hear a cijck.
! WARNING
You must hear a cock to complete installation
avodng shedding or damagtng the equipment
Correct IDIJ cables and power on the ODIJ and IDIJ.
ODIJ and IDU within 24 hours after unpacking. If you power off the ODIJ and IDU, restore power within 24 hours to prevent water from
Power on
entering the equtpment and affect the performance.
! WARNING
Tighten tt•e PG cmnector to prevent water from entenng the ODIJ. Firmly install the ODIJ to avoid shedding and damages to human bodies o r
the equipment.
Adjust the angle to make the upper
Connect the Ethemet cable to the ODIJ.
Click ,
part vertical.
sealing gland base
3 N•m to 3 7 N•m
—
Rubber bushing
Sealing gland nut
25 N•m
Tighten the PG connector to prevent water
from entering the ODU.
Insert a positioning pin to prevent the ODIJ from falling.
Advertisement
