Table of Contents
Advertisement
Memory Expansion Slot
The QuickPanel View is equipped with a 100-pin DIMM memory expansion slot,
which lets you increase DRAM to a maximum of 96MB.
Rear (open)
Disconnect power from your DC power supply before opening
the QuickPanel View. Working on a "live" unit may result in
damage to equipment and injury to personnel. Always use
anti-static precautions when accessing the interior of the
QuickPanel View.
Do not allow conductive material, liquid or solid, to contact
the electronics of the QuickPanel.
To install additional DRAM
1. Disconnect AC power from the DC supply.
2. With a small screwdriver, carefully remove the top rear access cover.
3. Insert the new DIMM carefully into the expansion slot, noting the
orientation of the pin locators. When the DIMM is fully seated, lift each
side clip until it clicks into place.
4. Snap the access cover back into place.
GFK-2306E
Caution
Caution
Chapter 4 Detailed Operation
Memory Expansion Slot
4
4-37
Advertisement
Table of Contents
