Table of Contents
Advertisement
Runtime Setup
To download an application to a QuickPanel View unit, you must set up a data
link between it and your development workstation. For more information, see
"Ethernet" in chapter 3 and "Downloading a Machine Edition Project" in the
Machine Edition online help.
Startup
When you first start up the QuickPanel View, a few configuration steps are
necessary.
To start the QuickPanel View
1. Apply DC power to the QuickPanel View.
Once power is applied, the QuickPanel View begins initializing. The first
thing to appear on the display is the splash screen.
2. To skip running any programs included in the StartUp folder, tap Don't
run StartUp programs.
The splash screen disappears automatically after about 5 seconds. The
Windows CE desktop then becomes visible.
3. Tap
4. In the Control Panel, double-tap
display.
5. In the Control Panel, double-tap
GFK-2306E
Start, point to
Settings and then tap
Chapter 1 Welcome
Control Panel.
Display to configure the LCD
Stylus to configure the touch screen.
1
1-3
Advertisement
Table of Contents
