2.
Select a
Ethernet Port Settings dialog box appears.
6. Select a method:
7. Enter the IP Address, Subnet Mask and Default Gateway numbers
obtained from your network administrator (manual method only).
8. Tap OK.
9. To save the settings, run the Backup utility. (See page 2-10.)
If the DHCP method was selected, the network server will assign an IP
address while the QuickPanel View is initializing. (You must be
connected to the network).
After setting an IP address for the QuickPanel View, you can access
any network drives or shared resources for which you have permission.
GFK-2306E
connection and choose
Obtain an IP address via DHCP (automatic).
Specify an IP address (manual).
Chapter 4 Detailed Operation
Properties. The Built-in
4
4-25