Calibration (Feed Direction); Information; Workflow - Roland VersaUV LEF2-300 Service Notes

Calibration (Feed Direction)

Information

Necessary tools
General tools
Media
Special tools
None
Typical work time
Contents of work

Calibration (Feed direction)

Workflow

1.
Turn on the power switch and enter the service mode.
2.
Set PET-G on the printer.
NOTE
The vacuum fan operates with the [PAUSE / VACUUM] key.
C AUTION
Set the table height by auto detection.
3.
Select [CALIB.DEFAULT] > [TEST PRINT], and press the [ENTER] key.
NOTE
A media width of 510 mm or more is required for test printing.
SERVICE MENU
PRINT MENU
[ ]
PRINT MENU
CALIB.DEFAULT
[ ][ ]
CALIB.DEFAULT
TEST PRINT
[ ]
Time
10 min.
[ ]
2-50
2
L EF 2-300