Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DeWalt DE9135
Summary of Contents for DeWalt DE9135
- Page 1 DE9135...
- Page 2 Figure 1 Figure 2...
-
Page 3: Technical Data
NiCd, NiMH, Li Ion SAVE THESE INSTRUCTIONS: This manual Charging current contains important safety and operating instruc tions nominal mode for the DE9135 battery charger. equalise mode • Before using charger, read all instructions and maintenance mode cautionary markings on charger, battery pack, Charging time and product using battery pack. -
Page 4: Important Safety Instructions For All Battery Packs
E NGL ISH • These chargers are not intended for The battery pack is not fully charged out of the any uses other than charging D WALT carton. Before using the battery pack and charger, read the safety instructions below. Then follow rechargeable batteries. - Page 5 EN GLI SH However, if the outer seal is broken: a. and the battery liquid gets on your skin, Read instruction manual immediately wash with soap and water for before use. several minutes. b. and the battery liquid gets into your eyes, flush them with clean water for a minimum Battery charging.
-
Page 6: Charging Process
INTENDED USE 2. Insert the battery pack into the charger. The red Your DE9135 charger accepts 7.2 – 18V NiCd, (charging) light will blink continuously indicating NiMH or Li Ion batteries. These chargers require that the charging process has started. -
Page 7: Electrical Safety
EN GLI SH Electrical Safety using a cloth or soft non-metallic brush. Do not use water or any cleaning Make sure that the voltage of your charger solutions. corresponds to that of your mains. Protecting the Environment Your D WALT charger is double insulated in accordance with EN 60335;... - Page 8 E NGL ISH THE FOLLOWING BATTERIES ARE COMPATIBLE WITH THIS CHARGER: DE9057 7.2 V NiCd 1.3 Ah DE9084 7.2 V NiMH 2.0 Ah DE9062 9.6 V NiCd 1.3 Ah DE9061 9.6 V NiCd 2.0 Ah DE9074 12 V NiCd 1.3 Ah DE9071 12 V NiCd...