[ IV Remote Controller ]
[1] Using the Remote Controller
IV Remote Controller
<1> Power ON/OFF
During operation
During stoppage
<2> Operation mode and set temperature settings
Operation mode setting
Button operation
Unit1
F1
F2
Set temperature setting
Button operation
Unit1
F1
F2
HWE22020
Unit1
2
FRI
Press the [ON/OFF] button.
The ON/OFF lamp will light up in green, and the operation will start.
Unit1
2
FRI
Pressing the [ON/OFF] button brings up a confirmation screen. When it appears,
press the [F3] button.
The ON/OFF lamp will come off, and the operation will stop.
Press the [F1] button to go through the operation modes in the order of "Heating,
Anti-Freeze, Hot water, and Heating-ECO."
2
FRI
Select the desired operation mode.
F3
F4
Press the [F2] button to decrease the set temperature, and press the [F3] button
2
FRI
to increase.
F3
F4
Anti-Freeze
Heating
Heating-ECO
Hot water
- 55 -
GB