Advertisement
1
Installing the Rotary Sensor
Parts needed for this procedure:
1
Rotary sensor
1
Inner sensor bracket
1
Outer sensor bracket
2
Bolt (M4-10 mm)
2
Bolt (M8-1.25 x 20 mm)
4
Locknut (M8)
1
Cam assembly
15
Flange nut
3
Bolt (M10-1.5 x 30 mm)
1
Bolt (M10-1.5 x 35 mm)
1
Locknut (M10)
1
Nut (M10-1 mm)
2
Nut (M4-0.07 mm)
2
Flat washer
Procedure
1. Ensure that the thrust frame is in the horizontal
position.
2. Support the cam tube with an overhead crane or floor
jack before proceeding to the next step
1. Cam-tube assembly
(Figure
Figure 1
2. Rod-loader assembly
1. Cam assembly
3. Disconnect the hydraulic fitting on the front side of the
cam assembly
1).
4. Measure the distance between the flag and the end of
the adjustment bolts as shown in Box A of
3
Figure 2
(Figure
3).
Figure 3
g0304 85
Figure
4.
Advertisement
