Yamaha PX10 Service Manual page 58

PX10/PX8/PX5/PX3
2-2-12. Maximum Output ( STEREO Mode ) ( 8Ω Mode/1 channel drive )
Select "Analog > CFG1 （ +14dBu ） " with Service inspection mode.
Measured mode ／ 8Ω MODE
Refer to the "Setups at the time of maximum output measurement"(Page 59).
※ Drive each channel.
2-2-13. Maximum Output ( STEREO Mode ) ( 2Ω Mode/1 channel drive )
Select "Analog > CFG1 （ +14dBu ） " with Service inspection mode.
Measured mode ／ 2Ω MODE
Refer to the "Setups at the time of maximum output measurement"(Page 59).
※ Drive each channel.
2-2-14. Maximum Output ( BOOST Mode ) < PX5, PX3 only >
Select "Analog > CFG4 （ BoostMode ） " with Service inspection mode.
Measured mode ／ 8Ω MODE
Refer to the "Setups at the time of maximum output measurement"(Page 59).
58
Measurement condition
Measurement condition
Measurement condition
Criteria
All channel
PX10 More than 253Vp-p
PX8 More than 227Vp-p
PX5 More than 179Vp-p
PX3 More than 139Vp-p
Criteria
All channel
PX10 More than 105.9Vp-p
PX8 More than 98.0Vp-p
PX5 More than 89.5Vp-p
PX3 More than 69.3Vp-p
Criteria
A channel only
PX5 More than 226.3Vp-p
PX3 More than 196.0Vp-p