NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Place the touchpad on the palm-rest assembly.
2. Align the screw holes on the touchpad with the screw holes on the palm-rest assembly.
3. Replace the screws that secure the touchpad to the palm-rest assembly.
4. Adhere the pieces of tape that secure the touchpad to the palm-rest assembly.
5. Slide the touch-pad cable into the respective connector on the system board and close the latch to secure the cable.
Post-requisites
1. Replace the
status-light
2. Replace the battery.
3. Replace the
base
cover.
computer. After working inside your computer, follow the instructions in
board.
Replacing the touchpad
28
After
www.dell.com/
Replacing the touchpad
49