Chapter 21: Removing The Power-Adapter Port; Prerequisites; Procedure - Dell Inspiron 13 7000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the base cover.
2. Remove the battery.
Procedure
1. Disconnect the power-adapter port-cable from the system board.
2. Remove the screw (M2x3) that secures the power-adapter port to the palm-rest assembly.
3. Lift the power-adapter port off the palm-rest assembly.
Figure 15. Removing the power-adapter port
1. power-adapter port-cable
3. power adapter port
Removing the power-adapter port
computer. After working inside your computer, follow the instructions in
2. screw
4. system board
Removing the power-adapter port
21
After
www.dell.com/
39