Table of Contents
Advertisement
Quick Links
QUANTUM:EV
EV OPENCHARGE
Single and Three Phase
Socketed EV Chargers
(GPRS/Ethernet Communication)
INSTALLATION
& OPERATION
MANUAL
MODELS:
SINGLE PHASE
OCPP0410
1 X 3.6kW
OCPP0411
1 X 7.2kW
OCPP0420
2 X 3.6kW
OCPP0421
2 X 7.2kW
OCPP0425
4 X 7.2kW
3 PHASE
OCPP0412
1 X 11kW
OCPP0413
1 X 22kW
OCPP0422
2 X 11kW
OCPP0423
2 X 22kW
Installation & Operation Manual
EVQROCM-01-V03-R0 January 2022
Advertisement
Table of Contents
Related Manuals for ROLEC QUANTUM:EV OPENCHARGE OCPP0410
Summary of Contents for ROLEC QUANTUM:EV OPENCHARGE OCPP0410
- Page 1 QUANTUM:EV EV OPENCHARGE Single and Three Phase Socketed EV Chargers (GPRS/Ethernet Communication) INSTALLATION & OPERATION MANUAL MODELS: SINGLE PHASE OCPP0410 1 X 3.6kW OCPP0411 1 X 7.2kW OCPP0420 2 X 3.6kW OCPP0421 2 X 7.2kW OCPP0425 4 X 7.2kW 3 PHASE OCPP0412 1 X 11kW OCPP0413...
- Page 2 Date Published: January 2022 Rolec Services Ltd are the publishers of this document and own the rights to use the text, images and all technical content contained within. Content supplied by third parties / partner organisations remains the property of that organisation and is used by agreement with the supplier.
-
Page 3: Table Of Contents
Product Support Contents Product Support Safety Safety Advice within this Manual Product Overview Product Features Product Specification Physical Specification Electrical Specification Certifications and Compliances Options and Accessories Unpacking Typical Contents Labelling Information Labels Installation Schematics Before Installation Installation Procedure Base Installation – If Supplied: If a Base is Not Supplied: Install the Pedestal Commissioning... -
Page 4: Safety
Rolec Services Ltd cannot accept any responsibility for improper installation or any problems arising from improper installation. NOTE: Damage to the equipment, connected systems or to property caused by improper installation are the responsibility of the installer. -
Page 5: Product Overview
Product Overview Product Overview The Quantum:EV OpenCharge is an OCPP compliant, smart charging unit which has been designed to provide the Host with full visibility and control of its use and, for the driver, a simple to use EV charging solution activated via an RFID card/fob or an online web or phone application which allows control of the unit and views of their charging activity. -
Page 6: Product Specification
Product Specification Product Specification Physical Specification Dimensions 1440 x 375 x 275mm (HxWxD) Chassis – 2.5mm Materials anodised finish Panels – 3.2mm Aluminium composite LED lens – Impact resistant 3mm Polycarbonate Base – Impact resistant, 5mm Polycarbonate Mass < 32 kg Operating Temperature -30°C to +50°C Operating Humidity Range... -
Page 7: Electrical Specification
Product Specification Electrical Specification Product Code OCPP0410 OCPP0411 OCPP0420 OCPP0421 OCPP0425 1x Type 2 2x Type 2 4x Type 2 C C h h a a r r g g i i n n g g S S o o c c k k e e t t ( ( s s ) ) (IEC 62196) (IEC 62196) (IEC 62196) -
Page 8: Certifications And Compliances
Options and Accessories Certifications and Compliances This product has been designed and built in accordance with the following standards and legislation: OCPP Version 1.6 J. Charging Compliance EN 61851-1:2011, Wiring Regulations BS 7671. EMC Compliance EN 301 489-01 V2.2.0, EN 301 489-03 V2.1.1, EN 301 489-52 V1.1.0, EN 50470-1:2006 (1x Skt) or EN 55032:2012 (2x &... -
Page 9: Labelling
Labelling Labelling Installers must observe any/all warning labels displayed on the equipment or inside the equipment enclosure. Labels may be in the form of adhesive ‘stickers’, plates, and/or moulded into the surface of components. Information Labels Figure 4 RFID and Socket Selection Label (4-Way Only) Figure 3 Typical Fascia Label... -
Page 10: Installation
Advice provided in this manual does NOT override any legislation. Rolec Services Ltd cannot accept any responsibility for improper installation or any problems arising from improper installation. NOTE: Damage to the equipment, connected systems or to property caused by improper installation are the responsibility of the installer. -
Page 11: Schematics
Installation Schematics Applicable to Single Phase, Single Socket Models: OCPP0410 OCPP0411 LED DRIVER Figure 8 Single Phase Single Socket Quantum:EV OpenCharge – Schematic EVQROCM-01-V03-R0 Installation and Operation Manual Quantum:EV OpenCharge Page 10 of 25 January 2022... - Page 12 Installation Applicable to Single Phase, Double Socket Models: OCPP0420 OCPP0421 LED Driver AC-N (BLUE) DC V- (Rlack) Constant Current Class 2 Power Supply Model: LD010H-CU03536-51 Input: 100-240Vac ~ 0.25A 50/60Hz Output: 25-36Vdc 350mA AC-L (Brown) DC V+ (Red) Watt: 12.6W Max. IP67 ta=60°C tc=90°C WHITE CABLE...
- Page 13 Installation Applicable to Single Phase, Four Socket Model: OCPP0425 Figure 10 Single Phase Four Socket Quantum:EV OpenCharge – Schematic EVQROCM-01-V03-R0 Installation and Operation Manual Quantum:EV OpenCharge Page 12 of 25 January 2022...
- Page 14 Installation Applicable to Three Phase Single Socket models: OCPP0412 OCPP0413 LED Driver AC-N (BLUE) DC V- (Rlack) Class 2 Power Supply Constant Current Model: LD010H-CU03536-51 Input: 100-240Vac ~ 0.25A 50/60Hz Output: 25-36Vdc 350mA AC-L (Brown) DC V+ (Red) Watt: 12.6W Max. IP67 ta=60°C tc=90°C WHITE CABLE...
- Page 15 Installation Applicable to Three Phase, Double Socket models: OCPP0422 OCPP0423 Figure 12 Three Phase Double Socket Quantum:EV OpenCharge – Schematic EVQROCM-01-V03-R0 Installation and Operation Manual Quantum:EV OpenCharge Page 14 of 25 January 2022...
-
Page 16: Before Installation
Units using GPRS require a suitable GPRS signal of 14 CSQ or better. Rolec cannot be held responsible or accountable in the event a GPRS unit is installed in a location without adequate network signal. 1. Establish a suitable site location for the unit that is both secure and environmentally safe. -
Page 17: Install The Pedestal
Installation Install the Pedestal IMPORTANT: All electrical work must be performed in accordance with the current Electrical Wiring Regulations applicable in the geographical region of the installation. CAUTION: Equipment Damage Do NOT use power tools to remove/install panel fixings. Power tools can damage the fixings, making the panel difficult to remove. Use hand tools ONLY and do not overtighten fasteners. - Page 18 Installation 11. Make sure all cable connections are secure and have not become loose or damaged in transit or during installation. 12. Make sure ALL debris is removed from the front and rear halves of the enclosure and that no debris is present on any of the components. NOTE: Debris and similar pollutants can adversely affect the performance and working life expectancy of components and will invalidate the product/component warranty.
-
Page 19: Commissioning
Commissioning Commissioning If the VendElectric service is NOT being used, another service provider will be required to administer smart services and commissioning will need to be performed in accordance with the alternative service provider’s instructions. Commissioning with VendElectric NOTE: A Smartphone or similar web enabled device with a working internet connection is required for the next steps. -
Page 20: Operation
Operation Operation NOTE: At the end of a charging session, always disconnect the cable from the vehicle before disconnecting from the charger. Operating instructions for this charger are shown on the unit fascia. For more detail, refer to the EV Driver App User Guide included within the charger packaging. VendElectric EV Driver Application The VendElectric EV Driver Application is a free download for use with smartphones running Google Android or Apple IOS. -
Page 21: To End A Charging Session
Operation To End a Charging Session 1. Use the mobile application to end the charge session. 2. Alternatively use an RFID card/fob to end the charging session. Or… The charger will issue a ‘beep’ sound to indicate the card has been recognised. -
Page 22: Maintenance
NOTE: In the event of a hardware issue, always contact your installer first. If damage has been sustained to communications devices and/or other ‘Smart’ components, it is recommended that an approved Rolec installer is called to perform the repair. Damage caused to the equipment by misuse, lack of maintenance, inappropriate maintenance or modification is not covered by the manufacturer warranty. -
Page 23: Suggested Inspection And Testing
Maintenance Suggested Inspection and Testing A record or inspection, testing and maintenance should be kept and may be required to support any claims within the warranty period. and 3 Quarter and 4 Quarter External Visual Inspection: External Visual Inspection: Check for physical damage. Check for physical damage. -
Page 24: Vendelectric Host's Guide
(Workplace Charging Scheme) USER ACCESS: Plug & Play Charging Getting Connected Mobile Phone App RFID Card/Fob HOST MANAGEMENT: To onboard your Rolec charging Unlimited Back-Office points to the VendElectric system Platform Access simply follow the following steps: Chargepoint Management Dashboard Visibility Of Your Entire 1. -
Page 25: Vendelectric Installer's Guide
VendElectric Back Office this can be done during the handover process. where they can also access easy-to- Rolec equipment is covered by a parts warranty, follow video walkthroughs of the system, however we recommend that you consider offering... -
Page 26: Installers Notes
Installers Notes Installers Notes Quantum:EV OpenCharge EVQROCM-01-V03-R0 Installation and Operation Manual Page 25 of 25 January 2022... - Page 28 THE UK’S LEADING MANUFACTURER OF EV CHARGING POINTS t: 01205 724773 e: enquiries@rolecserv.co.uk www.rolecserv.com...
Need help?
Do you have a question about the QUANTUM:EV OPENCHARGE OCPP0410 and is the answer not in the manual?
Questions and answers