Panasonic TX-42LZ980B Operating Instructions Manual page 23

18 TV Guide
≥ Displays Electronic Programme Guide.
19 EXIT
Returns to the normal viewing screen.
≥
20 Cursor buttons
Makes selections and adjustments.
≥
21 BACK
Returns to the previous menu / page.
≥
22 MY APP
Assigns a favourite application. After setting, starts
≥
the application easily by pressing this button.
≥ For details, refer to [eHELP] (Search by Purpose >
Home > Apps).
23 Operations for contents, connected equipment,
etc.
24 Text service button
25 Channel Up / Down
26 Subtitles
Displays subtitles.
≥
27 Last view
Switches to previously viewed channel or input
≥
mode.
∫ Installing / Removing batteries
Note the correct polarity (+ or -).
≥
Slide and lift
Close
R03/LR03, AAA
Remote Control Mode setting
If another Panasonic TV is near the TV, the other TV
may be operated when you use the remote control with
infrared. Change the TV's remote control mode to avoid
simultaneous operation.
Remote control mode 1 is the default setting.
≥
1
Display the menu bar and select [Main Menu], and
then select [Setup]
Main Menu
1 select
2 access
2
Select the remote control setting menu in [System
Menu]
1 select
2 access
3
Select the remote control mode in [Mode Setting]
1 select
2 access
4
Select [Mode2]
1 select
2 access
Press and hold [OK]/[MUTE]/[2]* (numeric buttons)
≥
buttons for at least 3 seconds, then press the OK
button.
To set to [Mode1], set to "1", to set to [Mode3], set
to "3", to set to [Mode4], set to "4".
≥ When using the remote control mode 1, set the TV
and the remote control to mode 1 respectively.
Setup
23
English