Panasonic TX-42LZ980B Operating Instructions Manual page 16

∫ Mains lead
Mains lead
Cable tie (Bundled the mains lead)
To loosen:
Keep pushing the knob
Knob
To remove from the TV:
Snaps
Keep pushing both side snaps
∫ Satellite connection
To ensure your satellite dish is correctly installed,
≥
please consult your local dealer. Also consult the
received satellite broadcasting companies for details.
For details, refer to [eHELP] (Search by Purpose >
≥
Watching > Basic > Satellite connection).
∫ Network
A broadband network environment is required to be able
to use internet services.
If you do not have any broadband network services,
≥
please consult your retailer for assistance.
≥ Prepare the internet environment for wired connection
or wireless connection.
Setup of the network connection will start when first
≥
using the TV. (p. 26)
For details, refer to [eHELP] (Search by Purpose >
≥
Network > Network connections).
16
English
Connections for 4K / HDR compatible
equipment
AC 220-240 V
TV
50 / 60 Hz
HDMI cable
4K / HDR compatible equipment
Reproduces the image more precisely with the
≥
expanded colour gamut and more smoothly with the
high frame rate when connecting the 4K compatible
equipment. [Mode2] is a mode that supports higher
definition signals than [Mode1]. [Mode3] is a mode
that supports higher frame rate signals than [Mode2].
Set to [Mode1] when the image or sound in HDMI
input is not played properly.
≥ Connect the 4K compatible equipment to HDMI
terminal using a 4K compatible cable and you can
watch content in 4K format.
Supporting HDR does not increase the peak
≥
brightness capabilities of the TV panel.
∫ [HDMI Auto Setting] ([Setup] menu)
Reproduces the image more precisely with the expanded
colour gamut and more smoothly with the high frame rate
when connecting the 4K compatible equipment. Select
the mode depending on the equipment.
[Mode1]:
For better compatibility. Set to [Mode1] when the
image or sound in HDMI input is not played properly.
[Mode2]:
For the 4K compatible equipment that has the function
to output the image precisely with the expanded
colour gamut
[Mode3]:
For the 4K compatible equipment that has the function
to output the high frame rate image
(This mode is valid in HDMI 1 and 2)
To change the mode
≥
1. Select the HDMI input mode connected to the
2. Display the menu bar and select [Main Menu], and
3. Change the mode in [HDMI Auto Setting].
≥ For information about the valid format, refer to
[eHELP] (Search by Purpose > Watching > 4K
resolution > HDMI Auto Setting).
equipment.
then select [Setup].