Panasonic TX-42LZ980B Operating Instructions Manual page 21

∫ If registration fails
If registration (pairing) is not completed properly, try
registering again.
1
Display the menu bar and select [Main Menu], and
then select [Setup]
Main Menu
1 select
2 access
2
Select the remote control setting menu in [System
Menu]
3
Select [Pairing]
The registration screen is displayed, so follow the
≥
on-screen instructions to register.
∫ When the remote control does not respond
1
Press and hold the buttons shown below
simultaneously for about 3 seconds
2
Point the remote control at the remote control signal
receiver and follow the procedure below to deregister
(unpair) the remote control
[Main Menu]
Menu] [Remote Control Settings]
3
Register (pair) the remote control again
registration fails" (p. 21)
For details, refer to [eHELP] (Search by Purpose >
≥
Functions > Voice Control > Settings).
Setup
[Setup] [System
[Unpair]
"If
Note
If the remote control is not registered (paired) with the
≥
TV, they communicate via infrared. Face the remote
control at the TV's remote control signal receiver for
operation when infrared communication is used.
Please note that voice controls will not be available.
If the remote control is registered (paired) with the TV,
≥
they communicate via Bluetooth
face the remote control at the TV's remote control
signal receiver when Bluetooth
used. Please note, however, that you will need to face
the remote control at the remote control signal
receiver for operation when turning on or off the TV.
. You will not need to
®
communication is
®
21
English