Time - Out Timer (Tot); Busy Channel Lockout (Bcl); Switching To Trunking Mode - Kenwood TK-7185E Instruction Manual

T - T (TOT)
IME OUT IMER
The purpose of the Time-out Timer is to prevent any caller from using a channel
for an extended period of time.
If you continuously transmit for a period of time that exceeds the programmed time
set by your dealer (default is 1 minute), the transceiver will stop transmitting and
an alert tone will sound. To stop the tone, release the PTT switch.
Your dealer can program the TOT time in the range of 15 seconds to 20 minutes.
B C L
USY HANNEL OCKOUT
When activated, BCL prevents you from interfering with other parties who may
be using the same channel that you selected. Pressing the PTT switch while the
channel is in use will cause your transceiver to emit an alert tone and transmission
will be inhibited (you cannot transmit). Release the PTT switch to stop the tone
and return to receive mode.
S T
WITCHING TO RUNKING
Depending on how your transceiver is programmed, you can return to Trunking
Mode in one of three ways:
Manual: Press the Clear key (default key is ■ ) to change the operating mode.
Auto: While in Conventional Mode, the transceiver periodically searches for the
network. When it fi nds the network, the transceiver automatically changes to
Trunking Mode. An alert tone sounds to notify you when the operating mode
changes.
Alert: While in Conventional Mode, the transceiver periodically searches for the
network. When it fi nds the network, an alert tone sounds. Press the Clear key
(default key is ■ ) to change the operating mode.
20
(BCL)
M
ODE