Programmable Functions; Searching For A Control Channel - Kenwood TK-7185E Instruction Manual

P F
ROGRAMMABLE UNCTIONS
, S, A, <B, C>, and ■ keys {page 7} can be programmed with the functions
The
listed below. Please contact your dealer for further details on these functions.
• Auto Reply Message
• AUX A
• AUX B
• Call
• Call Address Down
• Call Address Up
• Clear
• Clock
• Conventional
• Dialing
3
• Dialing Mode
4
• Emergency
• GPS Position Display
• Home Address
1
"Auto Reply Message" and "Playback" can be programmed only when the optional VGS-1 board has
been installed.
2
"Call Address Down" and "Call Address Up" can be programmed only on the optional microphone A, B,
C, and D keys.
3
"Dialing Mode" can be selected when Keypad Operation is set to Programmable.
4
"Emergency" can be programmed only on the
5
"GPS Position Display" can be assigned only if one of the COM ports is confi gured for GPS.
6
"Status/Stack" can be programmed only on the S key.
S C
EARCHING FOR A
After switching the power ON, press any key while the power-on text or unit
number is displayed to begin searching for a control channel.
• If no action is performed for 2 seconds, the transceiver will automatically begin searching
for a control channel.
• "---" appears on the sub-display and an arrow scrolls across the main display while the
transceiver is searching for a control channel.
• If more than one network is available, press the key programmed as Network Select to
manually change networks.
1
2
2
5
C
ONTROL HANNEL
• Horn Alert
• LCD Brightness
• Network Select
• None
1
• Playback
• Public Address
• Redial
• Scrambler
• Send the GPS Data
• Site Lock
• Status/ Stack
• Sub LCD Display
• Transceiver Password
key.
6
9