Programmable Functions; Conventional Operation; Scanning - Kenwood TK-7185E Instruction Manual

P F
ROGRAMMABLE UNCTIONS
, S, A, <B, C>, and ■ keys {page 16} can be programmed with the
The
functions listed below. Please contact your dealer for further details on these
functions.
• Channel Down
• Channel Up
• Clear
• Clock
• Emergency (Trunking)
• GPS Position Display
• LCD Brightness
1
"Emergency (Trunking)" can be programmed only on the
2
"GPS Position Display" can be assigned only if one of the COM ports is confi gured for GPS.
3
"Playback" can be programmed only when the optional VGS-1 board has been installed.
C O
ONVENTIONAL PERATION
1 Select the desired channel using the
Down).
2 Press the Squelch Off key (default key is
in order to monitor any activity on the channel.
• The icon appears on the display.
• The LED lights green and you will hear background noise.
3 Press the microphone PTT switch and speak into the microphone. Release
the PTT switch to receive.
• For best sound quality at the receiving station, hold the microphone approximately 3
~ 4 cm from your mouth.
S
CANNING
Press the Scan key (default key is S) to begin scanning.
• While scanning, the
• When a call is received, scanning stops and the channel number (or channel name if a
name has been set up) appears. Press the PTT switch and speak into the microphone
to respond to the call. The transceiver will continue scanning after an adjustable time
delay if the PTT switch is released and no further signal is received.
To stop scanning, press the Scan key again.
■ A
S / D
DD TO CAN
Press the Scan Delete/Add key (default key is A) to add or remove each
channel to or from the scan sequence.
• The channel add indicator (
selected channel is added to the scan sequence.
18
1
2
icon and "SCAN" appear on the display.
S
ELETE FROM CAN
• None
3
• Playback
• Scan
• Scan Delete/Add
• Scrambler
• Squelch Off
key.
and keys (Channel Up / Channel
) to turn the Squelch function OFF,
) will appear on the display when the