C Network update
You can update the software of this unit via the Internet if it is connected to the Internet.
1. Follow steps 2 to 5 in "Disc / USB memory stick update" on page 54.
2. Use [
] to select "Network", then press [OK].
• The unit will connect to the server, then check for the latest software version.
3. Software version confirmation screen will appear. Press [OK].
• Downloading of the latest software will start. (Download may take some time.)
After completing the download, update will start.
4. After updating finishes, this unit will restart automatically.
Caution
C
• Please Do Not Unplug the AC power cord, ethernet cable, wireless modem / router or press [y(POWER)] to
turn the unit to standby mode while using "Network update".
Note
D
• In order to update the software via the Internet, you must connect the unit to the Internet and set up
necessary settings.
• For the network connection, refer to "Connection to the network" on page 15.
• For the network setup, refer to "Network connection" on page 42.
• Software update will not change any of the current settings.
EN
55