Connection To The Network - Sanyo FWBP706FA Owner's Manual

4.4. Connection to the network

By connecting this unit to the Internet, you can update its software via the Internet, access BD-Live™ and other
network services such as Netflix, VUDU and YouTube™.
- Software update: For more information, refer to "Network update" on page 55.
- BD-Live™: For more information, refer to "Enjoying BD-Live™ discs using Internet" on page 30.
- Netflix / VUDU / YouTube™ : For more information, refer to "Information on network services" on page 37
Note
D
• A wired connection is the preferred method of connecting this unit to the Internet, especially while
performing a software update of this unit via the Internet. It also provides a more stable connection while
streaming HD video versus wireless LAN. Wireless LAN performance could be unstable if there are other
devices near this unit which also operate in the same frequency spectrum.
C Wired connection
Network equipment
(modem, etc.)
Internet
Caution
C
• Do not insert any cable other than an ethernet cable to the LAN terminal to avoid damaging the unit.
• Do not connect your PC directly to the LAN terminal of this unit.
Note
D
• When you connect an ethernet cable from a router with Internet access to this unit, it will automatically
configure network settings. (You do not need to manually configure network settings unless particular
settings are required.) however, when switching from wireless to wired, you need to select "Ethernet" in the
setup.
• If your modem does not have router functions, connect a wired router.
• If your modem has router functions but there is no vacant port, add a switch / hub.
• Please purchase shielded ethernet cables at your local store and use them when you connect to network
equipment.
EN
Broadband router or
hub
LAN
Ethernet cable
(not included)
WAN
5 4
Ethernet cable
(not included)
15
LAN
3 2 1
continued on next page