Table of Contents
Advertisement
Proxy setting
1. Follow steps 1 to 3 in "IP setting" on page 43.
2. Use [
] to select "Proxy Setting", then press [OK].
3. Use [
] to select "Enable", then press [OK].
4. Use [
] to select "Proxy Host", then press [OK].
5. "Proxy Host" setting screen will appear. Enter a proxy address using the cursor buttons and [OK].
• After completion, select "Enter" on the software keyboard.
6. Use [
] to select "Proxy Port", then press [OK].
7. "Proxy Port" setting screen will appear. Use [
input fields. When all fields are entered, press [OK] to confirm the entries.
Network
Language
Streaming Co...
Security
System
• The range of input numbers for the port number is between 0 and 65535. (This number must be no
greater than 65535.)
8. In order to confirm that this unit is connected to the Internet, perform "Connection test" (refer to page 42).
Note
D
• For proxy port, certain ports might be closed, blocked or unusable depending on your network environment.
• When the settings are changed, the network connection may be disabled depending on the device.
EN
Setup
a b c d e 1 2 3
f g h i
j 4 5 6
k l m n o 7 8 9
p q r
s t
. @ 0
u v w x y z
ABC
Back Space Enter
Clear
Setup
Change Proxy Port
Please Enter the New Port:
0
0
0
0
1
] to enter a number and [
44
] to move between
continued on next page
Advertisement
Table of Contents
