Miele ProLine CS 1212-1 Operating And Installation Instructions page 53

Securing the spring clamps and
spacer bars – granite and marble
worktops
You will need heavy-duty double-sided
tape (not supplied) to secure the spring
clamps or spacer bars.
a
a
 Attach the adhesive tape  along the
top edge of the cut-out in the posi-
tions shown in the hob illustration.
 Position the spring clamps  or
spacer bars  on the top edge of the
cut-out and press them firmly into
place.
b
c
 Apply silicone to the side and lower
edges of the spring clamps  or
spacer bars .
 Then fill the gap  between the
spacer bars  and the worktop with
silicone.
Installation
a
b
53