Cleaning The Stainless Steel Frame/Control Panel; Cleaning The Rotary Controls - Miele ProLine CS 1212-1 Operating And Installation Instructions

Cleaning the stainless steel
frame/control panel

Risk of damage by pointed ob-
jects.
The seal between the frame and the
worktop could be damaged.
Do not use pointed objects for clean-
ing.

Damage due to soiling.
Soiling, particularly salty food or li-
quid and olive oil, can cause damage
if left on the printed surfaces for a
long time.
Remove such soiling immediately.

Damage due to incorrect clean-
ing.
Stainless steel cleaners rub off the
printed symbols.
Do not use stainless steel cleaners
on printed symbols.
Cleaning and care
 Clean the frame and the control panel
with a solution of warm water and a
little washing-up liquid applied with a
soft sponge. Soften any stubborn
soiling beforehand. If necessary, the
rough side of a washing-up sponge
can be used.
Tip: You can also use a ceramic and
stainless steel cleaner to clean the ap-
pliance. We recommend using a stain-
less steel care product after cleaning to
help keep your appliance looking good.
(See "Optional accessories").

Cleaning the rotary controls

 Clean the rotary control(s) using a
solution of warm water and a little
washing-up liquid applied with a soft
sponge. Soften any stubborn soiling
beforehand.
 Dry the control(s) with a clean cloth.
35