Table of Contents
Advertisement
Operating
7.1
Function button
Three functions can be performed by pressing the function button on the IIoT Wireless
Communication Module.
Function
Duration of button
press
Manual paging
5 seconds
Hot swapping of
10 seconds
microSD card
10 seconds
Module reset
20 seconds
Note
Network communication
The green and blue LED will also light up to indicate network communication.
7.2
Reading and changing parameters
Before you start
• Register your device: Registering your device (Page 29)
• Log on at IIoT web application (http://www.siemens.com/mag8000iiotwebapplication).
Procedure
1. On the left select a device. You will see all active alarms for your device.
2. Click on the tab "Device Properties".
3. Filter the parameters by selecting a category.
SITRANS FM MAG 8000 IIoT Wireless Communication Module
Operating Instructions, 07/2022, A5E52070595A-AA
Description
Module wakes up and connects to the mo‐
bile network to check for new messages.
The microSD card can be removed without
triggering an alarm. A microSD card must be
inserted again before returning to opera‐
tion.
The Wireless Communication Module re‐
turns back to operation and can use the mi‐
croSD card again.
Resets all IIoT Wireless Communication Mod‐
ule parameters to their default values.
LED behavior
green lights up once
green lights up twice
after releasing the push button
blue lights up permanently
green lights up twice and goes off
after releasing the push button
green lights up three times
7
31
Advertisement
Table of Contents
