Hitachi GS4000 Series Quick Start Manual page 72

GS4000 Quick Start Guide, Revision 3
(3) Display of interfaces working as OSPF
You can roughly check the information related to all interfaces working as OSPF.
show ip ospf interface
GS1>
Domain: 1
Area 0.0.0.0
Address
172.16.10.10
Area 0.0.0.1
Address
172.18.10.11
GS1>
NOTE The example above is for the case where OSPF is used as a routing protocol.
(4) Display of OSPF neighbor routers
You can check the information related to the neighbor routers working as OSPF.
> show ip ospf neighbor
GS1
Domain: 1
Area 0.0.0.0
Interface Address: 172.16.10.10, Interface State: BackupDR
Address
172.16.10.11
Area 0.0.0.1
Interface Address: 172.18.10.11, Interface State: BackupDR
Address
172.18.10.10
Virtual Neighbor
Transit Area
0.0.0.1
GS1>
NOTE The example above is for the case where OSPF is used as a routing protocol.
54
State Priority Cost Neighbor DR
DR 1 1 1
State Priority Cost Neighbor DR
DR 1 1 1
State RouterID Priority DR
Full 172.17.1.1
State RouterID Priority DR
Full 172.18.1.1
Router ID Interface
192.168.10.1 172.18.10.11
...The information related to interfaces working as
OSPF will be shown.
Backup DR
172.17.1.1 172.16.1.1
Backup DR
172.18.1.1 172.16.1.1
...The information related to neighbor routers
working as OSPF will be shown.
Backup DR
1 172.16.10.11 172.16.10.10
Backup DR
1 172.18.10.10 172.18.10.11
VirtualNeighbor Cost State
192.168.10.11 5 FULL
QSGGS4KX10-00 5794092-2X