Advertisement
2. Pass the flexible board of the optical block through the hole of Outer Barrel Assy.
3. Tighten the six screws.
Hole
Outer Barrel Assy
Flexible Board
Optical Block
SEL2470GM (FE 2.8 / 24-70 GM) (FE 24-70mm F2.8 GM)
HELP08
1. Install the Cam Follower G_A(5.0_4.5) and Cam Pin Shaft(M) to the Zoom Cam Barrel. (Three portions)
2. Insert the 1st Group Block Assy S to the position where a screw hole of Cam Pin Shaft(M) is seen.
3. Install the Cam Pins A. (Three portions)
(Three portions)
Cam Follower G
_A(5.0_4.5)
Cam Pin Shaft(M)
Cam Pin A
Groove
Cam Pin A
2-6
Flexible Board
Zoom Cam Barrel
Groove
Cam Pin A
No groove
1st Group Block Assy S
Advertisement
