Power Trim And Tilt Will Not Operate; Water Separator-Alert Indicator Blinks While Cruising - Yamaha FL250A Owner's Manual

Hide thumbs Also See for FL250A:
Table of Contents

Advertisement

7. Engine main fuse (60 A)
8. Isolator fuse (60 A)
EMU29525

Power trim and tilt will not operate

If the engine cannot be tilted up or down with
the power trim and tilt because of a dis-
charged battery or a failure with the power
trim and tilt unit, the engine can be tilted man-
ually.
1.
Loosen the manual valve screw by turn-
ing it counterclockwise until it stops.
F200C, FL200C, F225B, FL225B, F250A,
FL250A
1
1. Manual valve screw
F225C
1. Manual valve screw
2.
Put the engine in the desired position,
then tighten the manual valve screw by
turning it clockwise.
EMU37571
Water separator-alert indicator blinks
while cruising
EWM01500
WARNING
Gasoline is highly flammable, and its va-
pors are flammable and explosive.
Do not perform this procedure on a hot
G
or running engine. Allow the engine to
cool.
There will be fuel in the fuel filter. Keep
G
away from sparks, cigarettes, flames or
other sources of ignition.
This procedure will allow some fuel to
G
spill. Catch fuel in a rag. Wipe up any
spilled fuel immediately.
The fuel filter must be reassembled
G
carefully with the O-ring, filter cup, and
hoses in place. Improper assembly or
replacement could result in a fuel leak,
which could result in a fire or explosion
hazard.
ZMU07386
If the water separator-alert indicator on the
6Y8 Multifunction tachometer blinks, perform
the following procedure.
1
ZMU03464
1. Water separator-alert indicator
1.
Stop the engine.
2.
Remove the top cowling.
3.
Remove the holder.
Trouble Recovery
86

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fl200cF225bFl225bF225cF250aF200c

Table of Contents