Inspecting And Replacing Anode(S); Checking Battery (For Electric Start Models) - Yamaha FL250A Owner's Manual

Maintenance
Tightening torque:
2.0 Nm (0.20 kgf-m, 1.5 ft-lb)
EMU29314

Inspecting and replacing anode(s)

Yamaha outboard motors are protected from
corrosion by sacrificial anodes. Inspect the
external anodes periodically. Remove scales
from the surfaces of the anodes. Consult a
Yamaha dealer for replacement of external
anodes.
ECM00720
NOTICE
Do not paint anodes, as this would render
them ineffective.
77
TIP:
Inspect ground leads attached to external an-
odes on equipped models. Consult a Yamaha
dealer for inspection and replacement of inter-
nal anodes attached to the power unit.
EMU29323
Checking battery (for electric start
models)
EWM01902
WARNING
Battery electrolyte is poisonous and caus-
tic, and batteries generate explosive hy-
drogen gas. When working near the
battery:
Wear protective eye gear and rubber
G
gloves.
Do not smoke or bring any other source
G
of ignition near the battery.