F225C
3.
Push the power trim and tilt switch "
(down) to lower the outboard motor to the
desired position.
DN
DN
ZMU06018
EMU28062
"
EMU32871
Power trim and tilt models
The outboard motor can be tilted up partially
to allow operation in shallow water.
ECM01490
NOTICE
If the engine speed is suddenly in-
G
creased when the outboard motor is par-
tially tilted up, the power trim and tilt unit
could be damaged.
Do not tilt the outboard motor up so that
G
ZMU04196
the cooling water inlet on the lower unit
is above the surface of the water when
setting up for and cruising in shallow
water. Otherwise severe damage from
overheating can result.
EMU32922
Procedure for power trim and tilt models
1.
Place the remote control lever in neutral.
ZMU04603
Operation
Shallow water
N
ZMU04588
56