Adjust The Volume - Sanyo FWSB405F A Owner's Manual

Adjust the volume

1
To increase or decrease the volume, press VOL +/- on the remote control.
Volume levels
0 - 5
(6 levels)
6 - 11
(6 levels)
12 - 17
(6 levels)
18 - 23
(6 levels)
24 - 29
(6 levels)
• When pressing VOL+/-, the indicator(s) will show the current volume. Pressing VOL+/- while the current volume is
shown will increase/decrease the volume.
• Pressing and holding VOL+ or VOL- will increase or decrease the volume and the Indicator(s) will blink. When the
volume has reached the maximum or minimum, the indicator(s) will stop blinking.
2
To mute the sound, press
Volume levels
Mute
• To restore the sound, press
NOTE(S)
• The volume might be influenced by MP3 or Bluetooth player. If the volume is too low, adjust the volume on the
connected device.
• If the volume level is set above 18 when the soundbar is turned off, the volume will automatically be reset to 18
when the soundbar is turned back on.
EN
LED lighting patterns
on the remote control.
LED lighting patterns
e.g.) When OPTICAL was selected
again or press VOL +/-.
LED behavior
Lights up for 3 seconds
(default: level 13)
LED behavior
Red indicator blinks continuously.
– 11 –