Connections; Connect To Tv; Connect Audio From Other Device - Sanyo FWSB405F A Owner's Manual

Included cables used in this connection are as follows:
• Line-in cable × 1
1
Connect to a device

Connect to TV

Rear of soundbar
LINE IN LINE
OPTICAL IN OPTICAL
Digital audio
optical cable
(not included)
Most modern digital TVs do not have red and white coaxial analog audio outputs, but do have red and white coaxial analog audio
inputs. If you plan to use red and white analog coaxial cables to connect your TV to this soundbar, please ensure that your TV
does indeed have red and white coaxial analog audio out. Refer to your TVs user manual for details.
To connect soundbar directly to other devices (Blu-ray player, game system, etc.), see your device's user manual.
Use a coaxial (RCA) to optical Toslink digital audio converter (not included) if your TV only has coaxial audio out.

Connect audio from other device

Rear of soundbar
AUX IN AUX
LINE IN LINE
OPTICAL OPTICAL IN
Digital audio
optical cable
(not included)
NOTE(S)
• Make sure the soundbar is turned off when connecting cables.
• Check whether all connection cables are properly connected.
• If you connect from the headphone output on the device's source to the line-input on the soundbar, make sure the
volume from the headphone output on the device's source is set to an appropriate mid-level sound. Setting it too
low will produce weak output from the soundbar or setting it too high could cause distortion.
• If a line / optical / AUX connection fails when connected to a TV, check the audio settings on the devices.
EN

CONNECTIONS

Analog
line-in cable
Good
Good
included
Best
Best
DIGITAL AUDIO
OUT (OPTICAL)
e.g.) Video game
– 8 –
HEADPHONE
or
DIGITAL AUDIO
OUT (OPTICAL)
Analog audio cable
(not included)
e.g.) Blu-ray player
e.g.) MP3 player
Analog line-in cable
included
Rear of TV
R
AUDIO OUT
L
HEADPHONE
Continued on next page.