Adjust The Volume - Sanyo FWSB415E Owner's Manual

Adjust the volume

1
To increase or decrease the volume, press VOL +/- on the remote control.
Volume levels
0 - 5
(6 levels)
6 - 11
(6 levels)
12 - 17
(6 levels)
18 - 23
(6 levels)
24 - 29
(6 levels)
• When pressing VOL+/-, the indicator(s) will show the current volume. Pressing VOL+/- while the current volume is
shown will increase/decrease the volume.
• Pressing and holding VOL+ or VOL- will increase or decrease the volume and the Indicator(s) will blink. When the
volume has reached the maximum or minimum, the indicator(s) will stop blinking.
2
To mute the sound, press
Volume levels
Mute
• To restore the sound, press
NOTE(S)
• The volume might be influenced by MP3 or Bluetooth player. If the volume is too low, adjust the volume on the
connected device.
• If the volume level is set above 18 when the soundbar is turned off, the volume will automatically be reset to 18
when the soundbar is turned back on.
EN
LED lighting patterns
INPUT
LINE USB AUX
OPTICAL
INPUT
LINE USB OPTICAL AUX
INPUT
LINE USB OPTICAL AUX
INPUT
LINE USB OPTICAL AUX
INPUT
LINE USB AUX
OPTICAL
on the remote control.
LED lighting patterns
INPUT
LINE USB OPTICAL AUX
again or press VOL +/-.
– 12 –
LED behavior
PAIR
PAIR
Lights up for 3 seconds
PAIR
(default: level 13)
PAIR
PAIR
LED behavior
The 3 LEDs in the middle blink
PAIR
continuously.