Table of Contents
Advertisement
Appendix E: Canadian Versions of SLC Devices
UL-listed SLC Device
Detectors
FSP-951
FSP-951-IV
FSP-951R
FSP-951R-IV
FSP-951T
FSP-951T-IV
FST-951
FST-951-IV
FST-951R
FST-951R-IV TC808B3102-
IV
FST-951H
FST-951H-IV
FAPT-851 (Acclimate™)
FSB-200, FSB-200S
FSI-851
FSP-851
FSP-851T
FSP-851R
FST-851
FST-851R
FST-851H
FSD-751PL
FSD-751RPL
FSH-751
FSL-751
FSC-851
FCO-851
Notifier SLC Wiring Manual — P/N 51253:U5 12/20/2017
ULC-listed SLC Device
FSP-951A
FSP-951A-IV
FSP-951RA
FSP-951RA-IV
FSP-951TA
FSP-951TA-IV
FST-951A
FST-951A-IV
FST-951RA
FST-951RA-IV
FST-951HA
FST-951HA-IV
FAPT-851A
FSB-200A, FSB-200SA
FSI-851A
FSP-851A
FSP-851TA
FSP-851RA
FST-851A
FST-851RA
FST-851HA
FSD-751PLA
FSD-751RPLA
FSH-751A
FSL-751A
FSC-851A
FCO-851A
Analog, addressable intelligent smoke detector that uses a photoelectric
sensing chamber. Listed for use in ducts. Designed to provide open area
protection. FlashScan and CLIP mode. White.
Analog, addressable intelligent smoke detector that uses a photoelectric
sensing chamber. Listed for use in ducts. Designed to provide open area
protection. CLIP mode only. Ivory.
Analog, addressable intelligent photoelectric sensor with remote test
capability. For use with DNR(W) in US; for use with DNRA in Canadian
applications. FlashScan and CLIP mode. White.
Analog, addressable intelligent photoelectric sensor with remote test
capability. For use with DNR(W) in US; for use with DNRA in Canadian
applications. CLIP mode only. Ivory.
Adds thermal sensors that will alarm at a fixed temperature of 135°F (57°C).
FlashScan and CLIP mode. White.
Adds thermal sensors that will alarm at a fixed temperature of 135°F (57°C).
Intelligent Photo/Temperature Detector. CLIP mode only. Ivory.
High temperature sensor with 190°F (87.8°C) fixed temperature alarm.
FlashScan and CLIP mode. White.
High temperature sensor with 190°F (87.8°C) fixed temperature alarm. CLIP
mode only. Ivory.
Incorporates a thermal rate of rise of 15°F (9.4°C). FlashScan and CLIP
mode. White.
Incorporates a thermal rate of rise of 15°F (9.4°C). CLIP mode only. Ivory.
High temperature sensor with 190°F (87.8°C) fixed temperature alarm.
FlashScan and CLIP mode. White.
High temperature sensor with 190°F (87.8°C) fixed temperature alarm. CLIP
mode only. Ivory.
Intelligent detector that combines a photoelectric sensing chamber and fixed
temperature heat detection (135°F/57.2°C). FlashScan capable.
Addressable, intelligent, single-ended beam smoke detector with built-in
sensitivity testing. FlashScan and CLIP mode.
Addressable, intelligent smoke detector that incorporates an ionization
sensing chamber. Designed to provide open area protection. FlashScan
capable.
Analog, addressable intelligent smoke detector that uses a photoelectric
sensing chamber. Listed for use in ducts. Designed to provide open area
protection. FlashScan capable.
Adds thermal sensors that will alarm at a fixed temperature of 135°F (57°C).
Analog, addressable intelligent photoelectric sensor that is remote test
capable. For use with DNR(W).
Intelligent thermistor sensing circuit for fast response. Designed to provide
open area protection with 50 foot spacing capability. A fixed temperature
sensor with 135°F fixed temperature alarm. FlashScan capable.
Incorporates a thermal rate of rise of 15°F (9.4°C). FlashScan capable.
High temperature sensor with 190°F (87.8°C) fixed temperature alarm.
Photoelectric Duct Detector, Low-flow.
Photoelectric Duct Detector, Low-flow.
Smoke detector provides early warning smoke detection in hostile
environments where traditional smoke detectors are not practical.
An advanced intelligent photoelectric detector that uses a laser diode,
special optics, and signal processing to obtain extremely high sensitivity.
Intelligent multi-criteria detector that combines photoelectric sensing, heat
detection, carbon monoxide and flame.
Addressable, intelligent detector that combines a photoelectric sensing
chamber combined with Carbon Monoxide (CO) sensors. FlashScan mode
only.
Description
73
Advertisement
Table of Contents
