Wiring a Detector Base
10.2 Wiring a Detector Base
Figure 10.1 shows typical wiring of a standard detector base (B501 is shown) connected to an SLC. An optional RA100Z Remote LED
Annunciator is shown connected to the base.
Notifier SLC Wiring Manual — P/N 51253:U5 12/20/2017
Figure 10.1 Wiring Detector Base B300-6/-IV, B210LP, or B501
NOTE: The base wiring is identical for the flanged B300-6, B210LP, flangeless B501, and -BL and -IV variants.
Intelligent Detectors, Intelligent Detector Bases, and Wireless Gateway
From Control Panel SLC
+
–
RA100Z
Remote LED
Annunciator
(Optional)
+
–
–
To Next
Device on
+
SLC
49