Checkpoints After Installation - Panasonic NP-6F1MLQ Operating And Installation Instructions

Installation Instruction
Water Outlet
Connect the water Drain Pipe. The Drain Pipe must be correctly fi tted to avoid water leaks.
Ensure that the water Drain Pipe is not bent or squashed.
Extension Hose
If a Drain Pipe extension is needed, make sure to use a similar Drain Pipe. It must be no
longer than 4 metres; otherwise the cleaning effect of the Dishwasher could be reduced.

Checkpoints After Installation

Following points should be checked before starting the Dishwasher.
1. The Dishwasher is level and fi xed properly.
2. The inlet water supply is open.
3. Inlet Pipe connections are fully tightened and not leaking.
4. The Power Plug is tightly connected.
5. The power is switched on.
6. The Inlet Pipe and Drain Pipe are knotted.
7. All packing materials and printings should be taken out from the
Dishwasher.
38
Dishwasher_NP-6F1MLQ.indb 38 Dishwasher_NP-6F1MLQ.indb 38
For Installer
7/19/2016 5:21:11 PM 7/19/2016 5:21:11 PM