Panasonic NP-6F1MLQ Operating And Installation Instructions page 18

Using the Dishwasher
4. After fi lling the container, tighten the Lid tightly clockwise.
5. The Add Salt indicator will turn OFF after the Salt Container has been fi lled with salt.
6. Immediately after fi lling the salt into the Salt Container, a washing programme should
be started. (It is recommended to use a short programme). Otherwise the Filter
Assembly, pump or other important parts of the Dishwasher may be damaged by
salty water. (Out of warranty coverage).
■
Note:
1. The Salt Container must only be refi lled when the Add Salt indicator,
Control Panel light up. Depending on how well the salt dissolves, the Add Salt
indicator may still appear even if the Salt Container is fi lled.
2. If there are spills of the salt, a soak or a rapid programme should be run to remove
the excessive salt.
18
Dishwasher_NP-6F1MLQ.indb 18 Dishwasher_NP-6F1MLQ.indb 18
on the
7/19/2016 5:21:04 PM 7/19/2016 5:21:04 PM