Checkpoints After Installation
Following points should be checked before starting the Dishwasher.
1.
The Dishwasher is level and fi xed properly.
2.
The inlet water supply is open.
3.
Inlet Hose connections are fully tightened and not leaking.
4.
The Power Plug is tightly connected.
5.
The power is switched on.
6.
The Inlet Hose and Drain Hose are knotted.
7.
All packing materials and printings should be taken out from the
Dishwasher.
No. 3, Jalan Sesiku 15/2, Section 15, Shah Alam Industrial Site,
Printed in China
40200 Shah Alam, Selangor Darul Ehsan
Website: http://www.panasonic.com
"OI Production Code"
G0317-0