Chapter 4 Configuration
This chapter provides configuration procedures for RX3i CEP Carriers and their I/O modules in a PROFINET I/O
network. For information on configuring the PROFINET I/O Controller and its LAN, refer to the I/O Controller
manufacturer's documentation.
Note:
To configure RX3i CEP Carriers in an RX3i Controller system, refer to the PACSystems
RX3i & RSTi-EP PROFINET I/O Controller Manual, GFK-2571.
This chapter discusses the following topics:
•
Configuration Overview
−
Basic Configuration Steps
−
Configuration Tool
•
Adding RX3i CEP Carriers to a LAN
−
Configuring RX3i CEP Carriers
−
Adding RX3i I/O Modules to a Remote Node
▪
▪
▪
−
Configuring Module Parameters
•
Assigning IO-Device Names
•
After the Configuration is Stored to the PROFINET I/O Controller
GFK-2883E
Adding and Configuring an Ethernet Port
Configuring Discrete Modules that have DIP switches
Configuring Analog Modules that have Jumpers
March 2018
35