Sharp Notevision PG-C20XE Operation Manual page 23

Operating the Wireless Mouse from the Remote Control
Remote Control/Mouse Receiver Positioning
• The remote control can be used to control the projector within the ranges shown below.
• The remote mouse receiver can be used with the remote control to control the mouse functions of a connected
computer within the ranges shown below.
• The signal from the remote control can be reflected off a screen for easy operation. However, the effective distance of the
signal may differ due to the screen material.
Controlling the Projector
Remote control
23 (7 m)
30˚
45˚
30˚
Effective buttons in MOUSE mode
Remote control
(Front view)
Remote control
(Rear view)
45˚
30˚
Remote control
Mouse
MOUSE
RIGHT-CLICK
AV MUTE
LEFT-CLICK
Using the Wireless Mouse
Remote control
30˚
30˚
120˚
13 (4 m)
Remote
mouse
receiver
Using as a Wireless Mouse
• When MOUSE is pressed, the buttons on the remote
control light up and the remote control enters MOUSE
mode.
• During MOUSE mode, the cursor can be used as the
pointer. MOUSE mode is for about ten seconds while
the buttons are lighting.
• When MENU or ENLARGE is pressed, MOUSE mode
is released to the normal mode.
• Be sure the supplied remote mouse receiver is
connected to your computer.
• The wireless mouse may not operate correctly if your
computer serial port is not correctly set up. Refer to the
computer's operation manual for details of setting up/
installing the mouse driver.
• For one-button mouse systems, use either the LEFT-CLICK
or RIGHT-CLICK button.
E-22