Sharp Notevision PG-C20XE Operation Manual page 21

Setting up the Screen
Projector
ON/OFF
LAMP
POWER
2, 3, 4
TEMP.
KEYSTONE
2, 3
AUTO SYNC
INPUT
1, 5
BACK ENTER MENU
(GUI) On-screen Display
Projector
ON/OFF
LAMP
POWER
TEMP.
KEYSTONE
1
AUTO SYNC
INPUT
BACK ENTER MENU
Digital Keystone Correction
• When the image is distorted due to the projection
angle, the digital keystone correction function allows
you to correct it.
• The digital keystone correction can be made by
pressing KEYSTONE, or by setting "Keystone"
correction in the GUI menu.
Using the GUI menu
1
Remote control
2
3
4
5
• To reset the keystone setting, press BACK.
• Straight lines and the edges of the displayed image may
appear jagged, when adjusting the keystone setting.
Using the KEYSTONE buttons
Remote control
1
Press MENU.
Press to select "Options", and then press
∂/ƒ
ENTER.
Press to select "Keystone", and then press
∂/ƒ
ENTER.
Press to move the
∂/ƒ
setting.
To exit from the GUI, press MENU.
Press KEYSTONE to adjust the setting.
mark to the desired
E-20