Toro 007 Maintenance Manual page 4

TKU C 01140--- 1 EN 0404
PREFACE
Congratulations on your choice of a TORO loader.
This manual describes the maintenance of this TORO 007 loader. Only those who have
been given proper training and are authorized to do so should operate the loader. All
operators should familiarize themselves with the machine and fully understand the contents
of the operator's manual, maintenance manual, and general safety instructions before
operating it.
Read the operator's manual and "General Safety
Instructions" before starting the work!
WARNING
This responsibility is particularly pertinent for personnel who work with the loader only
occasionally -- e.g., during setup or maintenance.
Continuing research and development of TORO loaders may have caused changes to your
machine that are not dealt with in this manual.
If the machine is equipped with optional equipment -- e.g., a remote control system -- you
should familiarize yourself with the separate instructions in which the equipment's operation
is explained.
This manual must always remain available in the cabin for ready access when operating the
TORO loader.
Always obey the national legislation in force where accident prevention and environmental
protection are concerned. Generally accepted technical guidelines for safe and professional
operation must also be observed.
For demanding maintenance and repair operations, we recommend that you contact your
nearest authorized Sandvik Tamrock Service. Our maintenance personnel have the skills
and special tools required for the most demanding tasks.
Through correct use and by following the maintenance instructions, you can expect a high
degree of utilization and long operating life of your loader.
Always obey safety rules!
3 (64)