Refueling; First Servicing - Toro 007 Maintenance Manual

16 (64)

2.7.2. Refueling

The following precautions must be observed when adding fuel:
Do not fill the fuel tank when the engine is running.
D
Do not overfill.
D
Take care not to spill fuel on hot surfaces.
D
Addition of fuel should be done in a well--ventilated space.
D
Smoking, open flames, and sparks are dangerous when the fuel tank is being filled.
D
Clean up spilled fuel before starting the engine.
D
Keep the filling pipe in contact with the fuel tank, or arrange grounding to prevent
D
sparking caused by static electricity.
If fuel quick fill system is to be used, ensure that you are familiar with the system
D
manufacturer's operating and safety requirements.

2.8. First servicing

Check that the lubricants being used meet site--specific operating requirements as per
Sandvik Tamrock Lubricant Specifications.
The following steps should be carried out during the first week of use (in addition to the
normal, scheduled services):
After the first 50 hours
-- Change the transmission oil filter element
-- Change transfer gearbox oil
-- Change engine oil and filter elements
-- Check and tighten the exhaust manifolds' bolts
-- Check that the air filter and air pipes are tight
-- Check and tighten bolts of oil sump and engine mountings
-- Check/tighten bolts of the axles, wheels, gearbox, and other major components
-- Tighten the screws of the oscillating axle
M12 bolts to 80 Nm (dry)
M16 bolts to 210--240 Nm (dry)
-- Tighten the screws of driveshafts
-- Check V--belts
-- Make a visual overall check for leaks and possible damage
MAINTENANCE AND LUBRICATION
TKU--- C 01140--- 1 EN 0404