Toro 007 Maintenance Manual page 29

28 (64)
D D D D Check junction boxes
Open all junction boxes.
-- Check that all boxes are dry
-- Ensure that the components and
junction boxes are mounted properly
-- Visually check for possible loose wires
inside the junction boxes
D D D D Check cables
Visually check the cables for
-- Wear
-- Sharp bends
-- Other possible damage
D D D D Check the instrument panel
Open instrument panel and check
-- Mounting of components
-- Condition of wiring
D D D D Grease driveshafts
Grease all driveshaft U--joints.
MAINTENANCE OPERATIONS
TKU--- C 01140--- 1 EN 0404