Table of Contents
Advertisement
UNIT CONTROLLER
•
Select Yes if Domestic Hot Water tank is installed.
•
Press OK button.
•
Select Yes if Swimming Pool is installed.
•
Press OK button.
•
Select Yes if Boiler is installed.
•
Press OK button.
•
Select Yes if an electrical backup heater is installed.
•
Press OK button.
55
PMML0575 rev.1 - 09/2021
•
Select the bivalent point for boiler or electric backup heater
(from -20 ºC to 20 ºC).
•
Press OK button.
•
Select Yes if fan coil can be controlled through the outputs.
•
Press OK button.
•
Select the type of room thermostat installed in circuit 1 or 2
(depending on the previous setting): None, wired or wireless.
•
Repeat this step in case of circuit 2.
•
Press OK button.
•
Configuration assistant is completed.
•
Press OK button to go to the main screen.
Advertisement
Table of Contents
